Flash Stock ROM Firmware Using SPD Upgrade Tool

Hello Friends  Welcome Again to Our Blog .Today we are going to Share you how to install / Flash Stock Rom / Firmware / Flash File / Custom Rom using SPD Flash Tool / SPD Upgrade Flash Tool on windows PC / computer.

Pre-requirements:- Before You  do this Process Make Sure your Device / Smartphone have been at-least 50-60% (persent) of battery Charge to perform this flashing process.

Flash Stock ROM Firmware Using SPD Upgrade Tool

1: => Now Follow Our Full process Very Carefully, You need to follow all steps Very Carefully .first of all you need to download Stock Rom / Flash File / firmware file on your PC / computer (according To your Device Model). Then extract  Downloaded zip file on your PC / computer Using 7zip / Winrar / Or any winrar applications . Then you need to  download SPD Upgrade Tool (SPD Flash Tool), and SPD IMEI tool and install both tool  on your PC / computer.

2: =>  When Step 1 Done then follow Step 2 . Then download USB driver (According to your Device Model) in your PC / computer and install USB Driver. When done then run the SPD Upgrade Tool / SPD Flash Tool by clicking on “ResearchDownload.exe” file.

3:=>  When the SpreadTrum upgrade tool / SPD Flashing tool fully is launched, Then  click on “Load Pocket” as shown in the below screenshot.

4:=>  Then choose the Stock Rom / Flash File/  firmware file / Custom Rom and then click on “Open” as shown in the below screenshot.

5:=>  When the Stock Rom / Flash File/  firmware file / Custom Rom  is loaded in the SPD Flash tool / SPD Upgrade Tool ,Then  connect your SPD Android device to the PC  / computer using original USB cable. Next, Then click on the “Start Downloading” button to Start flashing process.

6:=>  Flashing will Take Some time to Complete Firmware / Flash file / Stock Rom flashing process,
7:=>  When the Firmware / Flash file / Stock Rom flashing process is Done , Then you will see a Massage => “Previous Passed”  e in green color as shown in the below screenshot .

That’s it. Now if you follow our Process then you will Successfully flashed stock ROM /Flash file / firmware on your device..Now on your Device is fully power On Check all thinngs then Open Dialer Pad on your Device then Check your Device IMEI number by this Code *#06# . If your Device is Shown Imei Number is 0000 or Invalid or Blank then you need to repair IMEI your Device.. Repair IMEI First – But one Note IMEI Change is illegal in some Country ..We Do not Responsible any DemageOn your So we just Repair IMEI Using IMEI tool provided in the firmware file / Stock Rom  / Flash File and Repair original IMEI of device. When done, Disconnect  your device from the PC /  computer.

If you encounter any issues while you following this Flash file / Stock Rom /firmware Flashing tutorial, do let me know via comments Or Contact Us page..


IF i help You please Share this Post on Facebook / Twitter / WhatsApp..


  • Before you Flash Stock Rom / Flash file / Firmware file  on your Android Device Please take a backup first all your personal Data .
  • Your Personal all data will be remove if you follow this process .
  • If you want to flash your Device , So you Need to download Stock Rom / Firmware / Flash File for your Device . So we thought anfd Share you a Very good Website for Download all mobile firmware / flash file / Stock Rom .Download Stock Rom.
  • SPD Flash Tool Created and Distributed By SPD Chipsets.Inc so Full Credit Goes to them.
  • If you Want to learn More About SPD Chipsets So Visit Here.

Leave a Comment